Bathroom Remodeling in Kent, WA

Bathroom Remodeling in Kent, WA

Owner-operated bathroom remodels for Kent homeowners — from quick refreshes to full gut renovations across East Hill, West Hill, Panther Lake, and downtown Kent. Licensed, insured, and 0 minutes — we are based in Kent.

City of Kent permits Free in-home estimates Licensed & insured Owner-operated

A Local Contractor Who Actually Knows Kent Bathrooms

Kent's housing stock is what shapes every remodel decision here. Kent's housing stock is a real mix. Older mid-century homes in West Hill and Panther Lake were built between the 1950s and 1970s — that often means original galvanized supply lines, 60-amp panels, and load-bearing walls in awkward places. Newer subdivisions on East Hill (built mostly 1990s–2000s) come with engineered trusses and modern wiring, where the bigger upside is finally replacing the builder-grade finishes.

We're based right here in Kent — our team works in this market every week, and we know the neighborhoods, the inspectors, and the housing stock as well as anyone in town. That proximity matters — when materials show up damaged or an inspector needs a same-day correction, we are not driving in from Seattle.

Talk to Us About Your Project

What's Included

Everything Your Bathroom Remodel Needs — Done Right

Bathrooms are unforgiving — water, ventilation, and tight clearances all have to work together. Below is what's typically included in a Kent bathroom project; we tailor every estimate to your home.

Tile & Stone

Floor tile, large-format wall tile, custom shower niches, slab walls, and proper substrate (Schluter, cement board) under everything.

Vanities & Cabinetry

Stock, semi-custom, and custom vanities. Wall-mounted, single-sink, and dual-vanity layouts with soft-close hardware.

Plumbing

Toilet, sink, shower valve, and tub installation. Relocating drains, replacing old galvanized supply lines, and rough-in for new fixtures.

Fixtures

Faucets, showerheads, body sprays, handheld wands, tub fillers, towel bars, and hardware — coordinated with your aesthetic.

Lighting

Vanity sconces, recessed lighting, decorative pendants, and dimmer-friendly switching. Always to code, always GFCI-protected.

Waterproofing

Schluter Kerdi, Wedi, or hot-mopped pans. Proper waterproofing under tile is the difference between a 5-year and 30-year bathroom.

Ventilation

Exhaust fans sized for the room, vented to the exterior (not the attic), with humidity-sensing controls when requested.

Glass & Doors

Frameless shower glass, custom hinged or sliding panels, and barn-door hardware. Measured and templated after the tile is set.

Permits & Inspections

We pull City of Kent permits when plumbing or electrical work is involved, and we schedule the rough-in and final inspections.

Large format tile with free stand tub and walk in shower
Tub on tile shower with wide Niche and LED miror

Kent Permits & Considerations

What to Know Before You Start

The City of Kent requires a building permit any time a bathroom remodel involves plumbing relocation, electrical changes, or structural alterations. A like-for-like fixture swap (same toilet location, same vanity footprint) often doesn't require a permit — but moving a shower drain, adding a circuit, or changing the layout always does.

We pull every required permit through the Kent Permit Center, coordinate the rough-in and final inspections, and keep documentation in your project file. Bathroom permits matter especially at resale, since inspectors and appraisers flag undocumented work.

  • Permits filed with the City of Kent under our license, not yours
  • Rough-in and final inspections scheduled and met on-site
  • Kent inspectors are generally fast on scheduling — we usually get next-day or two-day rough-in inspections
  • Permit copies handed to you at close-out for resale records

Honest Pricing

What a Bathroom Remodel Typically Costs in Kent

Kent sits in the mid-range of the Puget Sound bathroom market. Below are the typical ranges we see — actual numbers depend on shower size, tile selection, vanity choice, and whether plumbing moves.

Refresh
$10,000 – $18,000

New vanity, toilet, fixtures, tile floor and lighting. Original layout, no plumbing relocation.

Mid-Range Remodel
$18,000 – $30,000

Custom shower with tile, new vanity and counters, full plumbing fixtures, ventilation, waterproofing, and lighting. Most common project here.

Full Primary / Custom
$30,000 – $45,000+

Layout changes, large walk-in shower, frameless glass, dual vanities, premium tile, heated floors, and designer fixtures.

Ranges are typical Kent bathroom project costs and don't include unforeseen issues (rot under old tile, galvanized supply line replacement) — we flag those in writing the moment we find them.

How We Work

Five Steps. No Surprises.

A clear process that keeps your Kent project on schedule, on budget, and easy to follow week-to-week.

1

Consultation

We come to your home, measure, listen to what you want, and talk through budget and timeline honestly.

2

Design & Estimate

Layout, material selection, and an itemized written estimate. You approve every line before we order.

3

Permits

We pull the City of Kent permits and schedule inspections so you don’t have to think about it.

4

Build

Demo, plumbing, electrical, finish work — done by our crew, not subbed out to strangers.

5

Walkthrough

Final inspection, punch-list with you on-site, permit close-out, and a written warranty handed over.

Kent Bathroom Remodel FAQs

Questions Kent Homeowners Ask Us

Do you pull permits in Kent, WA?
Yes. We pull all required permits through the Kent Permit Center for bathroom remodels that involve plumbing, electrical, gas, or structural work. We handle the application, inspection scheduling, and code compliance so you don't have to.
How long does a bathroom remodel take in Kent?
Most Kent bathroom remodels run 3 to 6 weeks of active construction. A straightforward hall-bath update wraps in 2–3 weeks. Primary bath remodels with custom tile work, frameless glass, and layout changes typically take 5–7 weeks, plus 1–3 weeks of design and permitting before that.
What does a bathroom remodel cost in Kent, WA?
Most Kent bathroom projects fall between $10,000 and $45,000. A typical mid-range hall bath with a new tile shower, vanity, and fixtures usually runs $18,000–$30,000. Primary suite remodels with dual vanities, frameless glass, and heated floors trend higher. You'll get an itemized estimate.
Do you work in East Hill and West Hill?
Yes — East Hill and West Hill are regular work areas for us, along with the rest of Kent. We're based right here in Kent — our team works in this market every week, and we know the neighborhoods, the inspectors, and the housing stock as well as anyone in town, Scheduling site visits and the build itself is straightforward.
Are you licensed and insured in Washington?
Yes. Big Build Construction is fully licensed, bonded, and insured to work in Washington State, including Kent. All work is performed to code and inspected where required.

Keep Exploring

Other Services & Nearby Cities

Ready to Start Your Kent Bathroom Remodel?

Free in-home estimates, itemized pricing, and a real human answering the phone.