Bathroom Remodeling in Tacoma, WA

Tacoma bathroom remodeling for historic homes and view properties — original tile careful preservation, modern shower systems behind the walls, and spa-style finishes that honor the architecture.

Get Your Free Estimate Call (206) 356-5380

City of Tacoma permits Free in-home estimates Licensed & insured Owner-operated

Bathrooms Done Right in Tacoma's Older Housing Stock

In a Tacoma bathroom, the age of the house dictates almost everything hidden behind the tile. The North End, Stadium District, and Proctor are full of early-1900s Craftsman bungalows, Tudors, and Victorians whose original baths still run on galvanized supply lines, cast-iron waste, and lath-and-plaster walls that keep secrets until demo day. South Tacoma and Central Tacoma lean toward 1940s–60s post-war construction, and the newer builds closer to the water start from a cleaner slate — but every one of them lives or dies on waterproofing done correctly.

Our company is based in Kent, a 30–35 minute shot down I-5, so a cracked tile order or a same-day inspection fix is a quick trip rather than a lost day. We also remodel kitchens in Tacoma and take on full home renovations here, and the same tile crew handles bathrooms up in Bonney Lake.

Talk to Us About Your Project

Free Tacoma Estimate

In-home consultation, written scope, and an itemized estimate — no obligation, no pressure.

Request Estimate Call (206) 356-5380 info@bigbuildconstruction.net

Find Us Online

Google Facebook Instagram

Yelp

Houzz

Nextdoor

What's Included

Every Trade Your Tacoma Bathroom Needs, In-House

Bathrooms are unforgiving — water, ventilation, and tight clearances all have to work together, and one weak link shows up as mildew two winters later. Here's what a typical Tacoma bathroom project covers, tailored to your home once we've walked it.

Tile & Stone

Floor tile, large-format wall tile, custom shower niches, slab walls, and proper substrate (Schluter, cement board) under everything.

Vanities & Cabinetry

Stock, semi-custom, and custom vanities. Wall-mounted, single-sink, and dual-vanity layouts with soft-close hardware.

Plumbing

Toilet, sink, shower valve, and tub installation. Relocating drains, replacing old galvanized supply lines, and rough-in for new fixtures.

Fixtures

Faucets, showerheads, body sprays, handheld wands, tub fillers, towel bars, and hardware — coordinated with your aesthetic.

Lighting

Vanity sconces, recessed lighting, decorative pendants, and dimmer-friendly switching. Always to code, always GFCI-protected.

Waterproofing

Schluter Kerdi, Wedi, or hot-mopped pans. Proper waterproofing under tile is the difference between a 5-year and 30-year bathroom.

Ventilation

Exhaust fans sized for the room, vented to the exterior (not the attic), with humidity-sensing controls when requested.

Glass & Doors

Frameless shower glass, custom hinged or sliding panels, and barn-door hardware. Measured and templated after the tile is set.

Permits & Inspections

We pull City of Tacoma permits when plumbing or electrical work is involved, and we schedule the rough-in and final inspections.

Get a Free Estimate

A few quick questions — about 30 seconds.

Done — your estimate is coming your way.

Thanks! We'll reach out within 24 hours. Need us sooner? Call (206) 356-5380.

Tacoma Permits & Considerations

Bathroom Permits in the City of Tacoma

The City of Tacoma requires a building permit whenever a bathroom remodel involves plumbing relocation, electrical changes, or structural alterations. Drop in a new toilet or vanity on the same footprint and you're often permit-free — but move a shower drain, run a circuit for a heated floor, or reframe the layout, and it's required every time.

We file through the Tacoma Permit Center under our license, schedule the rough-in and final inspections, and keep the paperwork in your project folder. That documentation earns its keep at resale, when appraisers and inspectors go looking for undocumented wet-area work.

Bathroom permits filed with the City of Tacoma in our name, keeping the liability off you
Plumbing and electrical inspectors met on-site at both rough-in and final
The North Slope and Stadium historic overlays can add a review step — we know when a project triggers it
Signed-off permit copies handed to you at close-out for your resale records

Honest Pricing

Bathroom Remodel Costs in Tacoma, by Scope

Tacoma bathrooms price out in the middle of the Puget Sound range. The three tiers below cover most of what we build; your figure moves with shower size, tile selection, the vanity you choose, and whether any plumbing gets relocated. You'll see it all itemized before work begins.

Refresh

$10,000 – $18,000

New vanity, toilet, fixtures, tile floor and lighting. Original layout, no plumbing relocation.

Mid-Range Remodel

$18,000 – $30,000

Custom shower with tile, new vanity and counters, full plumbing fixtures, ventilation, waterproofing, and lighting. Most common project here.

Full Primary / Custom

$30,000 – $45,000+

Layout changes, large walk-in shower, frameless glass, dual vanities, premium tile, heated floors, and designer fixtures.

These are typical Tacoma bathroom ranges and leave out what older homes hide — rot under a decades-old pan, a run of galvanized pipe ready to fail. Anything we uncover goes to you in writing the day we find it, never smuggled into the final bill.

How We Work

How a Tacoma Bathroom Project Runs

Five clear steps that keep the work on schedule, the budget honest, and each week easy to see coming.

Consultation

We come to your home, measure, listen to what you want, and talk through budget and timeline honestly.

Design & Estimate

Layout, material selection, and an itemized written estimate. You approve every line before we order.

Permits

We pull the City of Tacoma permits and schedule inspections so you don’t have to think about it.

Build

Demo, plumbing, electrical, finish work — done by our crew, not subbed out to strangers.

Walkthrough

Final inspection, punch-list with you on-site, permit close-out, and a written warranty handed over.

Tacoma Bathroom Remodel FAQs

What Tacoma Homeowners Ask Before a Bathroom Remodel

Do you pull City of Tacoma permits for a bathroom remodel?

Yes. Any time a bathroom job relocates plumbing, adds a circuit, or alters structure, we file with the Tacoma Permit Center and coordinate the rough-in and final inspections. You never have to stand in line at the permit desk.

How long does a bathroom remodel take in Tacoma?

A straightforward hall-bath update wraps in about 2–3 weeks, and most Tacoma bathrooms finish inside 3 to 6 weeks of active work. A primary suite with custom tile, frameless glass, and a moved layout runs 5–7 weeks, plus 1–3 weeks of design and permitting beforehand.

What does a bathroom remodel cost in Tacoma?

Expect somewhere between $10,000 and $45,000. A mid-range hall bath with a new tiled shower, vanity, and fixtures usually runs $18,000–$30,000, while a primary suite with dual vanities, frameless glass, and heated floors sits higher. You get a line-item estimate first.

Which Tacoma neighborhoods do you cover?

From the North End and Proctor to Stadium District, Hilltop, and South Tacoma — the whole city. Our Kent base is 30–35 minutes north on I-5, so getting to your site and back is never the bottleneck.

Are you licensed and insured in Washington?

Yes — licensed, bonded, and insured across Washington State, Tacoma included, with every bathroom built to code and inspected where required.

Can you keep a clawfoot tub or pedestal sink in an older Tacoma bathroom?

If the original fixtures are sound and you want to keep them, we re-plumb around them and bring them back to life. Paired with period-appropriate tile and fittings, the finished bath looks like it was always meant to be that way.

Do you remodel bathrooms in the North End and Stadium District?

Regularly — they're among our most detail-heavy jobs. We demo gently to save original plaster where we can, hide modern shower systems inside century-old walls, and finish in a way that respects the home's era.