Kitchen Remodeling in Auburn, WA

Kitchen Remodeling in Auburn, WA

Owner-operated kitchen remodels for Auburn homeowners — from quick refreshes to full gut renovations across Lea Hill, Lakeland Hills, West Hill, and downtown Auburn. Licensed, insured, and 12–15 minutes from our Kent location.

City of Auburn permits Free in-home estimates Licensed & insured Owner-operated

A Local Contractor Who Actually Knows Auburn Kitchens

Auburn's housing stock is what shapes every remodel decision here. The mid-century ranches and split-levels around downtown and North Auburn were built between the 1950s and the 1970s — that usually means undersized 1970s plumbing, original 2-wire electrical to the kitchen, and load-bearing walls that limit easy "open concept" knockdowns. The newer subdivisions in Lakeland Hills and Lea Hill are typically 1990s–2000s builds with engineered floor trusses and modern panel service, where the bigger upside is replacing builder-grade finishes.

We're based in Kent, about a 12–15 minute drive up Highway 167 or down West Valley Highway, so site visits, material drops, and inspection coordination across Auburn are part of our normal day. That proximity matters — when materials show up damaged or an inspector needs a same-day correction, we are not driving in from Seattle.

Talk to Us About Your Project

What's Included

Everything Your Kitchen Remodel Needs — Under One Roof

We handle the full scope so you're not chasing four subs. Below is what's typically included in a Auburn kitchen project; we tailor every estimate to your home.

Cabinetry

Custom, semi-custom, or stock cabinet installation with soft-close hardware, pull-outs, and crown detail. Refacing available where the boxes are still sound.

Countertops

Quartz, granite, butcher block, and solid surface. Templating, fabrication coordination, and seamless installation included.

Plumbing

Sink and faucet swaps, dishwasher rough-ins, ice-maker lines, and re-piping outdated supply lines common in older homes.

Electrical

Code-compliant outlets and GFCIs, under-cabinet wiring, dedicated circuits for ranges and microwaves, and panel upgrades when required.

Flooring

LVP, engineered hardwood, tile, or refinishing existing hardwoods. Subfloor repair included when we open things up and find rot.

Tile & Backsplash

Subway, mosaic, slab, and large-format tile. Proper substrate, waterproofing where needed, and clean grout lines.

Fixtures & Appliances

Faucets, sinks, range hoods, and appliance installation. We coordinate delivery so nothing arrives before we are ready for it.

Lighting

Recessed cans, pendants over islands, under-cabinet LED, and dimmer-friendly switching. Wired right the first time.

Permits & Inspections

We pull City of Auburn permits when plumbing, electrical, gas, or structural work is involved, and we schedule the inspections.

Custom cabinetry & quartz countertops
Full layout redesign with island

Auburn Permits & Considerations

What to Know Before You Start

The City of Auburn requires a building permit any time a kitchen remodel involves structural changes, electrical alterations, plumbing relocation, or gas line work. A like-for-like cosmetic refresh (paint, cabinet doors, countertops with no plumbing relocation) usually doesn't require a permit — but the moment you move a sink or add a circuit, it does.

We pull every required permit through the Auburn Permit Center, coordinate the rough-in and final inspections, and keep documentation in your project file so it's there if you sell the home later. Skipping permits is one of the most common ways homeowners get burned at resale.

  • Permits filed with the City of Auburn under our license, not yours
  • Rough-in and final inspections scheduled and met on-site
  • Lakeland Hills HOA awareness — we know which design changes need approval
  • Permit copies handed to you at close-out for resale records

Honest Pricing

What a Kitchen Remodel Typically Costs in Auburn

Auburn sits in the mid-range of the Puget Sound market. Below are the typical ranges we see — your number depends on size, scope, and material selection, and you'll get an itemized estimate before any work starts.

Refresh
$20,000 – $32,000

Cabinet refacing or paint, new countertops, sink & faucet swap, backsplash, and updated lighting. Same footprint, no moving plumbing.

Mid-Range Remodel
$32,000 – $50,000

New stock or semi-custom cabinets, quartz counters, new appliances, flooring, lighting, and minor electrical/plumbing updates. The most common project here.

Full Custom
$50,000 – $65,000+

Custom cabinetry, layout changes, wall removal, premium appliances, panel upgrades, and high-end finishes.

Ranges are typical Auburn kitchen project costs and don't include unforeseen repairs (rot, knob-and-tube replacement, etc.) — we flag those in writing the moment we find them, never bury them in a final invoice.

How We Work

Five Steps. No Surprises.

A clear process that keeps your Auburn project on schedule, on budget, and easy to follow week-to-week.

1

Consultation

We come to your home, measure, listen to what you want, and talk through budget and timeline honestly.

2

Design & Estimate

Layout, material selection, and an itemized written estimate. You approve every line before we order.

3

Permits

We pull the City of Auburn permits and schedule inspections so you don’t have to think about it.

4

Build

Demo, plumbing, electrical, finish work — done by our crew, not subbed out to strangers.

5

Walkthrough

Final inspection, punch-list with you on-site, permit close-out, and a written warranty handed over.

Auburn Kitchen Remodel FAQs

Questions Auburn Homeowners Ask Us

Do you pull permits in Auburn, WA?
Yes. We pull all required permits through the Auburn Permit Center for kitchen remodels that involve plumbing, electrical, gas, or structural work. We handle the application, inspection scheduling, and code compliance so you don't have to.
How long does a kitchen remodel take in Auburn?
Most Auburn kitchen projects run 4 to 8 weeks of active construction once demo begins. Cabinet refresh projects can wrap in 2–3 weeks. Full gut renovations with layout changes typically take 8–12 weeks, plus 2–4 weeks of design and permitting before that. You'll get a written week-by-week schedule before we start.
What does a kitchen remodel cost in Auburn, WA?
Most Auburn kitchen projects fall between $20,000 and $65,000. A typical mid-range project with new semi-custom cabinets, quartz counters, and updated lighting usually lands around $32,000–$50,000. Custom cabinetry, premium appliances, and layout changes push toward the upper end. You'll get an itemized estimate.
Do you work in Lakeland Hills and Lea Hill?
Yes — Lakeland Hills and Lea Hill are regular work areas for us, along with the rest of Auburn. We're based in Kent, about a 12–15 minute drive up Highway 167 or down West Valley Highway, so site visits, material drops, and inspection coordination across Auburn are part of our normal day, Scheduling site visits and the build itself is straightforward.
Are you licensed and insured in Washington?
Yes. Big Build Construction is fully licensed, bonded, and insured to work in Washington State, including Auburn. All work is performed to code and inspected where required.

Keep Exploring

Other Services & Nearby Cities

Ready to Start Your Auburn Kitchen Remodel?

Free in-home estimates, itemized pricing, and a real human answering the phone.